awori interior silicone matte is a matte and smooth-looking, water-repellent paint with high coverage that combines economy and quality.

Integrates with the applied surface.

It has high inhalation ability.

When applied in accordance with the building material standards, it does not crack, blister and spill.

Since it is water-based, it does not have an unpleasant smell, it is environmentally friendly.

Application surface: Fawori interior wall is used with suitable primers on silicone matte, concrete, exposed concrete, plaster, MDF, concrete, brick, old painted, glass textile, paintable wallpapers.

Satin plaster shows its high decorative performance on surfaces with paste and completed infrastructure.

Fawori interior facade conversion primer should be used on mineral-based, very low absorbency, non-dusting, raw plastered interior surfaces to be applied for the first time.

When transparent primers are used on such surfaces, the primer forms a glassy layer on the surface, as it cannot be absorbed by the surface.

For this reason, since the top coat paint cannot reach sufficient thickness by not holding on to the surface, there may be a covering problem. Fawori fieffaf primer should be used as a single coat on surfaces with a dusty character and high absorbency, such as plaster, without scanning and polishing.

If pigmented primer is used on such surfaces, there may be an adherence problem in the paint. If water-based paint is to be used on a solvent-based surface, a fawori interior facade conversion primer should be used after the surface is sanded.

Direct paint application should not be applied on lime and loose layers.

Thinning: It is recommended to apply two layers by thinning 15-20% with clean water.

Consumption: Depending on the smoothness and absorbency of the surface, 13-17 m2 of floor can be painted with 1 lt in a single layer.