-
for OUR PAINTS are SPECIALLY prepared FOR YOUR ORDER from OUR COLOR machine (according to the article "Products specially produced for you or made special by making changes or additions to you with your request"), the SCOPE OF the RIGHT OF WITHDRAWAL IS excluded. IF A different color option IS requested IN the chart IN the visual, please contact US BY message. WE are AT your service with unlimited color options. Fawori Interior Wall Silicone Mat is a dull and smooth-looking, water-lifting, high coverage paint that combines economy and quality.
-
Integrates with the applied surface
-
Has high respiration ability
-
Does not crack, blister and spill when applied in accordance with building material standards
-
It does not have an unpleasant smell because it is water-based, it is environmentally friendly
-
APPLICATION SURFACE: Fawori Interior Wall Silicone Mat is used with suitable primers on concrete, exposed concrete, plaster, MDF, concrete, brick, old painted, glass textile, paintable wallpapers
-
Satin plaster shows its high decorative performance on surfaces with putty and completed substructure
-
Fawori interior Facade Conversion Primer should be used on mineral-based, very low absorbency, non-dusting, raw plastered interior surfaces to be applied for the first time
-
Since transparent linings cannot be absorbed by the surface when used on such surfaces, the primer forms a glassy layer on the surface
-
For this reason, since the top coat paint cannot reach sufficient thickness by not holding on to the surface, there may be a covering problem
-
Fawori fieffaf Primer should be used as a single layer on dusty surfaces such as satin plaster without scanning and polishing
-
If pigmented primer is used on such surfaces, there may be an adherence problem in the paint
-
If water-based paint is to be used on a solvent-based surface, Fawori Interior Wall Conversion Primer should be used after sanding the surface
-
Direct paint application should not be applied on lime and loose layers
-
THINNING: 15% with clean water
-
It is recommended to apply two coats by thinning by 20
-
CONSUMPTION: 1 Lt to 13 in one layer depending on surface smoothness and absorbency
-
17 m2 floor can be painted
-
Controlled sample study has to be performed for precise consumption
-
When your product arrives, check the package next to the Cargo Officer
-
If you detect a damage, be sure to attach a "DAMAGE ASSESSMENT REPORT" to the cargo officer
-
Cargo officers are obliged to submit minutes for damaged cargoes







