Bianca Stella Water Based Pure Acrylic Paint

It is a water-based, pure acrylic-based new generation conversion paint with excellent adhesion to all surfaces.

Paint in accordance with EN-71-3 Child and Toy Safety Standard.

SURFACES TO BE APPLIED It can be applied to all kinds of surfaces such as wood, furniture, parquet, laminate, ceramic, porcelain, tile, marble, glass, plastic, metal, aluminum, galvanized, zinc, stone, wall, paper.

PROPERTIES • ITS covering is very high. • It has excellent water resistance, so it also provides waterproofing on the surface where it is applied. • It has high chemical resistance (soap, cleaning detergent, diluted bleach, etc.). • It does not leave brush and roll marks because it is very good to spread and gives the user the desired time for necessary corrections. • It does not require any additional varnish application thanks to the glossy appearance it leaves after application. • It has high adhesive strength, it does not require any primer. • Dirt and stain resistant, it is cleaned very easily with a wet and soapy cloth. • It has perfume, no unpleasant smell. • Since it has high resistance to water and chemicals, it does not require protective varnish application (except for places where contact with water is high and the floor). • It is suitable for use in all indoor and outdoor spaces.

APPLICATION THE APPLICATION surface must be clean. The surface should be free from all factors that will reduce the adhesion of the paint to the surface, such as all dust, dirt, oil and silicone, and sanding should be done when necessary. It does not require the use of any primer before application. It is recommended to prime the surface with Bianca Antirust to prevent the formation of corrosion on metal surfaces. After opening the BiancaStella package, it is mixed until a homogeneous consistency is obtained. It is applied to the required pre-prepared surface with silk brush, velvet roller or spray in 2 cathals without thinning the product. Between coats. It should be waited for 2 hours. During the application, care should be taken to ensure that the applied surface and ambient temperature is between +5°C and +30°C.