Bianca stella water-based pure acrylic paint

It is a water-based, pure acrylic-based new generation conversion paint with excellent adhesion to all surfaces.

Paint in accordance with En-71-3 child and toy safety standard.

The surfaces to be applied can be applied to all kinds of surfaces such as wood, furniture, parquet, laminate, ceramic, porcelain, tile, marble, glass, plastic, metal, aluminum, galvanization, zinc, stone, wall, paper.

Its properties • its coverage is very high. • It has excellent water resistance, so it also provides waterproofing on the surface where it is applied. • It has high chemical resistance (soap, cleaning detergent, diluted bleach, etc.). • It does not leave brush and roller marks because it is very good to spread, it gives the user the desired time for the necessary corrections. • It does not require an additional varnish application thanks to the bright appearance it leaves after the application. • It has high adhesive strength, does not require any primer. • It does not stain and stain, it is very easily cleaned with wet and soapy cloth. • It is perfumed, does not have an unpleasant odor. • It does not require protective varnish application (except for places and floors where contact with water is high). • It is suitable for use in all indoor and outdoor spaces.

The application surface must be clean. The surface should be free from all factors that will reduce the adhesion of the paint to the surface, such as all dust, dirt, oil and silicone, and sanding should be done when necessary. It does not require the use of any primer before application. It is recommended to prime the surface with bianca antirust to prevent the formation of corrosion on metal surfaces. After opening the Biancastella packaging, it is mixed until a homogeneous consistency is obtained. It is applied to the required pre-prepared surface with silk brush, velvet roller or spray in 2 cathals without thinning the product. Between coats. It should be waited for 2 hours. During the application, care should be taken to ensure that the applied surface and ambient temperature is between +5°c and +30°c.