Evokids Bellows Finger Protector Color: Translucent Package contents: 2 Pieces (75 cmx19 cm two pieces) Height:150 cm Width: 19 cm Evokids bellows finger protector is an auxiliary safety product against the possibility of pinching children's fingers into the hinge spaces of the doors.

Evokids articulated finger protector takes a flat form when the door is open, it curves outwards when closed.

Assembly

You do not need any tools in the assembly of the Evokids bellows finger protector.

What you need to do in order

The door should be flush with the molding (180 degrees).

Align the guard evenly with the door and the sill.

You can make light markings with a pencil towards the end of the molding to avoid incorrect gluing.

You should glue the protector by leaving a gap of maximum 2-3 cm from the floor, starting from the bottom.

Open the first of the double-sided tape on the protector and stick it to the places you mark without inclining to the right and left.

Then open the second tape and stick it on the door leaf.

After the bonding process of the first part, complete the bonding process by zooming the second part to the first part from the top.

Finally, you should attach the additional double-sided tape by centering it on the joint of the two protectors.

Important Warning: Child safety products are auxiliary safety products, parents should have constant control over their children in case children can open or break these products.

Published by Connect Prof ©