Definition and propertiesIt is an alkyd binder based, semi-gloss semi-gloss wood varnish developed for wooden surfaces and used for decorative and protective purposes.

resistant to mold and fungus thanks to special additives.

protects the wood against water and ultraviolet rays.

very easy to be absorbed by wood.

abrasion resistant.

it does not need to be wiped after drying after application.

Creates a film layer on the surface.

The surfaces to be applied can be used in all types of woodworking, facade cladding and wooden garden furniture.

All kinds of oil, dirt, resin and dust have to be cleaned on the application surface

if necessary, it should be sanded and the sanding powders should be cleaned.

The application is applied in 2 layers, 8 hours apart, with one of the brush, roller or spraying methods.

If any, the knots should be burned and the resins should be cleaned with cellulosic thinner.

If the wood to be applied is raw wood, it is recommended to apply 1-2 layers of impregnation before applying fawori wood stain in order to fully protect the wood against mold, fungus and woodworms.

When it is necessary to reapply on surfaces that have previously been fawori wood stained, a light sanding should be done if the surface can bear itself, then it should be wiped with a damp cloth and painted with the color on 1 layer of surface.

If there are shielding and swelling points on the surface, new application should be made after these are removed from the surface.

care should be taken to ensure that the temperature of the surface to be applied is between +5°c and +30°c.

It is ready to be used for thinning.

It cannot be thinned.

Drying time (at 25°c, 65% hr)touch drying : 1-2 hours hard drying : 4-5 hours hard drying : 12 hours hard drying can be applied on an area of 11-13 m2 in a single layer with 1 l depending on the type and absorbency of the wood.

Controlled sample study has to be performed for precise consumption.