-
ISONEM liquid GLASSLiquid GlassISONEM liquid GLASS glass, mosaic, tile, porcelain, ceramic, marble, granite, natural stone, wood, concrete, screed, galvanized sheet, aluminum, etc.
-
is a dual-component product used in waterproofing with high chemical and physical resistance as well as excellent water resistance, which can be produced as transparent or transparent color with high resistance to atmospheric conditions, excellent adhesion to surfaces, as well as for decorative purposes
-
U
-
Not affected by V and external weather conditions
-
Does not turn yellow, fade or rise over time
-
It is easily applied without disturbing and damaging the existing coating, especially in solving insulation problems arising on floors such as balconies, terraces, bathrooms, pools
-
Solvent-based, two-component TECHNICAL SPECIFICATIONS Density (25°C, g/mL) : 0
-
0 - 90
-
10Water transfer rate (kg/ m
-
0 h
-
1, CLASS W?Water vapor permeability (m) : 5 ? sD ? 50, CLASS II Mixture Life (hours, 20°C) : 1 (may vary depending on ambient temperature) ·Mixture Ratio (by weight) : 7 Parts Liquid Glass A Component / 1 part Liquid Glass B Comp
-
Drying Time (hours, 20°C) : 4 – 8 (may vary depending on the applied surface, application fullness and humidity
-
) ·Hardening Time (hours, 20°C): 18
-
24 (relative humidity of air should be less than 80%
-
) ·Full cure reaction time : 7 daysUsage AreasGlass, glass brick, mosaic, tile mosaicTiles, ceramics, marble, granite, natural stone, porcelain surfacesPress bricks, · Wooden surfacesBalcony, terrace, bathroom, kitchen, stone coated exteriorsCeramic, glass mosaic coated ornamental poolsIt helps prevent dusting on absorbent surfacesWide area of useApplicationSurface preparation: Relative humidity of air up to 80%, ambient temperature 15
-
35°C and the surface temperature to be applied should be at least 5°C
-
It should not be applied outdoors in rainy weather
-
Surface cleaning should be done very well for a good adhesion
-
All kinds of oil, dust, dirt, rust and similar substances that may prevent the liquid glass from adhering to the surface between the liquid glass and the floor on the surfaces to be applied should be completely cleaned.
-
If the paint is damaged and swollen on old painted surfaces on which liquid glass will be applied, it should be completely scraped off.
-
The sanded surface provides better mechanical properties for liquid glass application and helps the liquid glass to adhere better to the surface
-
Method of administration: Before the application, the two components should be thoroughly mixed in the given proportions and by weight
-
The two components can only have the desired reaction when they are in a uniform and complete mixture state
-
Waiting time between coats should be 24 – 48 hours/20°C, for the best it should be used as 2 or 3 coatsSubstance and SuggestionPACKAGE: A Component: 3.5 kg, B Component: 0.5 kg in 4 kg sets
-
CONSUMPTION: 0.15
-
0,20 kg/m2 (single coat)20
-
26 m /setRAF LIFE: 2 years from the date of manufacture, with the packaging lids tightly closed, away from heat and fire in dry and cool environments


