FLEXDUB - POOL LEAK REPAIR CHEMICAL 1 Liter

Flexdub Pool Leakage Repair Chemical leaks occurring on wet floors, without the need to break the ground,

It provides permanent solutions in a shorter time with less cost by crystallizing inside the crack without forming a layer on the surface.

It can be done with a certain direction in the repair of leaks on wet floors.

1- Removing the floor covering and making sliding insulation

2- Filling between the pavement on the surface

3- Using perfect materials that will form a layer on the surface

4- Flexdub Pool Leakage Repair Chemical, on the other hand, provides permanent solutions in a shorter time with less cost by crystallizing in the crack, without creating a layer on the surface, without having to break the leakage on wet floors, the environment.

HOW IS FLEXDUB POOL LEAK REPAIR CHEMICAL APPLIED?

Our consumption can be calculated as 1 lt per 2 square meters. (The floor covering of our consumption, the possibility of variability according to the amount of leakage.)

Before application, the floor was briefly wiped with the use of a brush and water.

After cleaning, the expenses are closed.

Application can be done when the floor is damp.

In the application, it is first applied raw to the floor with the help of the brush available in the middle of the total product.

3-5 hours(According to the air temperature, ground freezing of the product should not be avoided.

If crystallization is observed, the brush and a small amount of water should be dissolved.) then the remaining product is mixed with water to be 1 liter of FLEXDUB Pool Leak Repair Chemical in 4 liters of water and a low product is obtained in births for fine cracks and

Application is made.

After this behavior, it is waited for 12 hours for the material to be absorbed by the floor and then the drains are opened.

The floor was washed with plenty of water and cleaned from residues.

(The floor should not be allowed to dry within the 12-hour waiting period.

Water should be left on the intermediate floor in the middle.)

For example • 15 liters of FLEXDUB Pool Leak Repair Chemical is taken for the application of a 30 m² floor leak (terrace, bathroom, wet floors).

The floor was thoroughly wiped with the use of a brush and water.

After cleaning, the drains of the floor are covered.

It corresponds to 7.5 liters in total usage product.

Direct the entire orientation by pouring 7.5 liters of product on the floor and using a brush.

After 3-5 hours, the remaining 5 liters of chemical is diluted in a ratio of ¼ and disperses all surfaces without spilling on the floor and again with a brush.

Following the second application, water is discharged 12 times during a waiting period in such a way that the floor material is irrigated.

The purpose of this is that we need to drain the product to enter the remaining capillary holes.

At the end of this process, the drains are washed with an open floor and can be used.