-
FLEXDUB INSTALLATION LEAKAGE REPAIR CHEMICAL FLEXDUB Installation Leakage Repair Chemical detects the area where the leakage is located without any intervention to the area where the existing water leakage is located and crystallizes and closes the leaks formed in the system on site
-
At the pressure and temperature in the installation, our product does not lose its own characteristics and maintains its continuity
-
This product, which you can use with peace of mind in all kinds of plastic and metal installations, will provide you a comfortable use without effort
-
This product contains 50 lt per day generated in closed circuit, boiler floor heater central system
-
It is a chemical that prevents leaks up to
-
Our product is used in central system heating cooling systems, fire hydrant lines, cold water pamphlet lines 1
-
000 < .
-
It is also used in leaks up to
-
(You can contact our company in case of larger leaks
-
) 30% of the material consists of mini particles from 2 to 300 microns in size
-
These particles can clog fine filters
-
Filter should not be used during the process
-
The material does not damage the pump, boiler in any way
-
Antifreeze, Cleaning, Preservative etc. in the system before applying the product
-
it is necessary not to leave chemical residues
-
The presence of such chemicals in the system causes the leak removal chemical to lose its properties
-
How is FLEXDUB Installation Leak Repair Chemical Applied ? The return filter of the boiler is removed from the system
-
The system is cleaned of coarse dirt by filling and emptying the boiler with a water filling tap or a water pump
-
After the system is cleaned of coarse dirt, it is poured into 1 liter of product by mixing 3 liters of water from a suitable part of the towel radiator or combs
-
The filled area is closed again and water is flooded into the system
-
1
-
The boiler is operated at 5, 2 bar level
-
(In plastic installations, especially the boiler should be operated in hot setting
-
Plastic pipes expand when heated, so the leakage point is removed when the maximum expansion level
-
) The boiler is operated without stopping for 24/36 hours, in case of water shortage, it is supplemented from the water filling tap
-
At the end of 24/36 hours, the system pressure will be fixed
-
If possible, it will be more beneficial for you to keep the product in the system for 1 week with the combi boiler after the system pressure is fixed
-
It must remain in the chemical system for a minimum of 24 hours after the system leak is eliminated
-
The complete crystallization of the product is 24/36 hours
-
After the system leak is eliminated, the system is drained, the return filter can be reinstalled according to the customer's request, and then clean water is infused again and use can be resumed
-
Our product is manufactured as a concentrate to put 1 liter of chemical in 50 liters of water
-
You can determine how much product you need by proportioning to the amount of water in your system
-
If the height of the leak is at serious levels, you can reach us and get technical support


