SOUDAL SOUDAFLEX 40FC POLYURETHANE SEALANT 600ml WHITE SAUSAGE Soudaflex 40 FC is a high quality, single component, polyurethane-based joint filler with a high coefficient in sealing and bonding applications.

TECHNICAL SPECIFICATIONS: Base: Polyurethane Thickness: Paste Drying System: Moisture curing Tissue formation (*) (20°C/65% relative humidity): Approximately 15 min.

Drying rate (*) (20°C/65% RH): 2mm/24h Hardness (DIN 53505): 40 ± 5 (according to Shore A test) Specific gravity (DIN 53479): 1.30 g/ml Maximum permissible degradation: 20% Temperature resistance (completely dry): -30°C to +90°C Flexible return (ISO 7389): >80% Modulus of Elasticity 100% (DIN 53504): 0.80 N/mm2 Maximum stress (DIN 53504): 1.70 N/mm2 Elongation at break (DIN 53504): >700% CHARACTERISTICS: - Very easy to apply - Permanent elasticity after hardening - Very good adhesion in many materials - Excellent resistance to many chemicals - Excellent resistance to UV rays - Especially developed for concrete APPLICATIONS: - All sealing and bonding applications in the construction sector - Structural bonding PACKAGING in vibrating constructions: Color: Behyazy Packaging: Sausage 600 mL Shelf life: at temperatures between +5°C and +25°C, in a cool and dry storage area, at least 12 months in unopped packaging.

JOINT SIZE: Minimum Width: 2mm (in bonding applications), 5mm (in bonding points) Maximum Width: 10mm (in bonding applications), 30mm (in bonding points) Minimum Depth: 5mm (in bonding points) Recommendation: 2 x depth=width SURFACES at joints with depth=width >12mm at joints with ≤ 12mm: Type: All building surfaces, most metals, polyester and many plastics.

Except glass surfaces.

Surface condition: Clean, dry, free from dust and oil Pretreatment: In very hot and humid climates, we recommend the use of Primer 100 for applications on porous surfaces.

Primer is not required for non-porous surfaces.

Non-porous surfaces can be activated by the surface activator.

We recommend a pre-conformance test.

APPLICATION: Method: Silicone Gun Application temperature: +5°C +35°C Cleaning: Finishing with white spirit immediately after use: Before tissue formation, Repair with soapy solution: WARNINGS with the same product: In order to ensure our product is correct, Soudal recommends a small adhesion test.

When painted with oxidative drying dyes, problems may occur in the drying of the dye.

HEALTH and SAFETY RECOMMENDATIONS: Practice general industrial hygiene and wear protective gloves.

Note: The guidelines contained in this document are the result of our experiments and experiences and are presented in line with the goodwill approach.

No responsibility can be accepted for the results obtained due to the diversity of materials and surfaces and the large number of applications beyond our control.

However, it is recommended to perform preliminary experiments in all cases.