30x30cm Patterned Pvc Tile

1 m2 purchases are also sent in 11 pieces.

Recreate your living spaces without needing a master, without breaking them.

Patterned pvc tile is not a sticker, that is, a label.

0.5 mm

It is produced in Turkey by UV printing on thick, environmentally friendly PVC.

It is adhered to every material with a smooth surface such as ceramic, tile, mdf-lam, laminate flooring, metal, marble.

It can be cleaned with any kind of surface cleaner.

They do not fade or fade.

After removing the protective tape on the back side of the PVC tile, press it firmly and stick it on the floor you will apply.

If you want to remove the pvc tile you pasted again, do not use your nails.

After disassembling using a spatula or screwdriver tip, you can stick it elsewhere.

PVC tile does not stain where it is removed.

PVC tile should be protected from fire, hot pots, teapots, etc.

should be avoided.

HOW TO APPLY • Pattern formation has to BE planned by lining up on a floor before gluing.

The surfaces to be glued must be flat, clean and dry.

We do not recommend it on wallpaper with plaster and embossed ceramics and tiles.

The protection paper on the back side is stripped and adhered starting from the very corner so that the PVC tiles are adjacent to each other.

Thus, the contaminated joints of the old material are also closed.

After the bonding process is completed, old joints corresponding to the end edges on WET surfaces have to be covered with a joint filling material and water flow has to be prevented.