Pieces and Dimensions in Package

1 x Large vacuum bag (50x70 cm)

1 x XLarge vacuum bag (55x90 cm)

2 x Xxlarge vacuum bags (80x100 cm)

1 x Jumbo vacuum bag (73x130 cm)

How is it used?

1ST STAGE

All products to be vacuumed must be clean and dry.

Carefully fold each piece and stack it regularly and place it in the bag.

Do not overfill the bag.

Leave a minimum distance of 10 cm at the closing edge to ensure density.

2nd stage

Hold one edge of the bag opening and firmly press the two edges with the thumb and forefinger of your other hand. With the latch inside the bag, close the zipper of the bag by pressing and sliding the latch firmly 4 times from one end of the mouth of the bag to the other.

Make sure that the mouth of the bag is closed.

Phase 3

Open the cover on the valve and place the vacuum cleaner's pipe on the cavity, operate the vacuum cleaner and ensure that all air in the bag is sucked until the desired vacuum effect occurs.

When your bag is sufficiently compressed, separate the vacuum cleaner's pipe from the valve, close the lid, and end the vacuuming process.

4th stage

Lock the cover and place the vacuum packaged textiles in the place where you will store them with the valve cover facing up.

Do not drag the bag by holding the valve or the filling opening of the bag during transportation.

In order to use your vacuum bag for a longer time, make sure that your bag is not damaged in the areas where you will stack it.

Return Conditions: Your products must be returned as they have been delivered to you, wrapped in potatoes, boxed and undamaged. Otherwise, returns sent will not be accepted.