Incubator Pet Aquarium Heater Cooler Boiler Freezer Refrigerator Boilers Controller -50C and 110c 0.1C 1500W Device use and settings: The device has 1 indicator.

This display shows the ambient temperature.

There are 2 buttons on the device.

With these buttons, the settings of the device are made.

Basically, 2 temperatures can be set in the device.

These values can be seen by pressing the right and left buttons.

Depending on the size of these values connected to the left and right buttons, the device automatically switches to heater or cooler mode.

If the temperature setting connected to the left button is large, the device works in cooler mode.

( Left: 30 Right: 20 Cooler mode ) If the temperature setting connected to the right button is large, the device operates in heater mode.

( Left: 20 Right: 30 Heater mode ) You can see these temperature values with short key presses.

If you press the buttons for a long time, you can change the settings of the relevant value.

After prolonged pressing, the buttons start to function up and down.

This value is saved when you wait for a while after setting the relevant temperature by pressing the up and down buttons.

And the device will start to work according to this value.

For example, let's set the value connected to the left button to 37 degrees and the value connected to the right button to 38 degrees.

In this case, the device will be in ideal settings for incubation.

The heater is activated when the ambient temperature drops below 37 degrees.

The environment will start to heat up.

When the temperature rises above 38 degrees, the device will turn off the heating.

In this case, the ambient temperature will circulate between 37-38 degrees.

Digital Thermostat 220V Aquarium Incubation Thermostat Xh-W3001