-
this PRODUCT has been SPECIALLY PREPARED FOR the ORDER from the machine ( "
-
Products specially produced for the order and prepared by making changes or additions to it "
-
Article) is excluded from the SCOPE OF THE RIGHT OF WITHDRAWAL.
-
It is not possible to return and exchange.
-
5 kg: 8 - 10 m² /tin box COLOR: Off-white It is a very strong insulation paint produced by modifying with special chemicals and polymers to eliminate moisture and humidity problems caused by natural conditions on the interior and exterior walls of buildings.
-
It can be applied to all kinds of wet, damp or dry walls, painted and unpainted surfaces.
-
Thanks to its excellent alkaline and mold resistance, it prevents the formation of mold and moisture on the walls and destroys them, if any.
-
Its adhesion resistance to all kinds of surfaces is extremely strong, it never gets up, does not blister, and its resistance to chemicals is quite good.
-
It is not affected by UV and rain, water and salt.
-
It is used in interior and exterior walls, sub-basements of buildings, basements, garages or cellars, interior walls facing north and in areas where there is a lot of moisture and humidity.
-
Creates a film that shows excellent water resistance on the surface where it is used.
-
Paint or wall clings very tightly to the surface, even if it is damp or wet, dries quickly and provides insulation.
-
It is not affected by salt water and salt vomiting.
-
Due to this feature, it is also used to solve the problem of paint blistering in the sub-bases of the buildings.
-
ISONEM MS 82 moisture paint forms a waterproof on the surface where it is applied, while at the same time it penetrates the wall and dries the moisture inside thanks to its special chemicals.
-
In this way, it provides drying inside the wall where it is applied.
-
ISONEM MS 82 moisture dye has no side effects.
-
Therefore, it does not cause any chemical damage to the surface or materials to be applied.
-
Wet and damp, on walls,painted or unpainted damp walls,sub-basements, interior and exterior walls,basement walls, surfaces such as plaster, gypsum, concrete, screed and floors,tunnels, northern facades of buildings, walls with mold and fungus, etc.
-
in many dampness and humidity problems.
-
ISONEM MS 82 moisture paint is ready for use and does not require primer.
-
The application surface may be wet, damp, damp, moldy, mushroomy or dry.
-
It can be applied to all kinds of painted and unpainted surfaces.
-
If there are raised parts only on painted surfaces, they have to be cleaned.
-
The ISONEM MS 82 cover in its original packaging should be opened and mixed thoroughly for 3 minutes.
-
After the mixing process is completed, the first coat should be applied to the existing surface with the help of a brush and roller.
-
After the first coat, it should be waited for 24 hours and the second coat should be applied.
-
Ventilation of the application areas must be done well, masks, gloves and protective goggles must be used during the application.



