Height: 30cm type: Normal table

advantages OF external bearings:

1.Ultimately tapered balanced structure 2.Uniform tessellation on the entire surface of the screw 3.Wear-resistant surface with a robust internal structure resistant to breakage 4.High surface protection thanks to galvanic coating 5.High safety thanks to quality connection equipment 6.Ergonomically shaped attractive handles.

dıck offers a very wide range of products in terms of curing feature, dimensions and shapes.

advantages of external trays: 1. Tapered balanced structure towards the end 2. Uniform troweling on the entire surface of the truss 3. Wear-resistant surface with a robust internal structure resistant to breakage 4. High surface protection thanks to galvanic coating 5. High safety thanks to quality connection equipment 6. Ergonomically shaped attractive handles.

Maintenance: All external masats are suitable for dishwasher washing and cleaning in sterilizers up to 120 c.

However, high-concentrated cleaner residues, being left in high-temperature steam environments such as cleaning media or dishwashers for too long, some residues such as protein and meat may cause stain or corrosion formation.

Therefore, it is recommended to clean by hand using a soft cloth and acid-free mild alkali-based cleaner.

If it is a careful shape after washing, stain formation has to be prevented by drying.

dry areas have to be preferred in the storage of the tables.

Masts should not be used for tools or levers.

Masking: Particular care should be taken to ensure that the knife and the table are at the right point and at the right angle when masking.

The troweling process is applied sequentially to the right and left edges of the blade starting from the point closest to the blade handle to the blade tip and forming a permanent 15-20 degree angle.

Warranty: External masats are guaranteed for life in terms of materials and workmanship.

incorrect use and non-compliance with maintenance conditions are not covered by the warranty.

Return Conditions : Your products must be returned in the same way as you received them, wrapped in patents, boxed and undamaged.

Otherwise, returns sent will not be accepted.