Extremely successful on home, shower and office windows and glass surfaces.

It is self-adhesive. You can lift the carrier behind it and apply it to the following specified surfaces. Our product is waterproof and resistant to water, it is very easy to clean, and has no harmful effects on human health.

Window films reduce the effects of UV rays by minimizing their exposure to high light and sunlight.

Glass Sandblasting Foil Application

Glass sandblasting foil • Spray bottle • Water + a few drops of dishwashing detergent • Ragle (application apparatus) • Utility knife 1. Clean the glass There should be no dust, dirt and oil on the glass surface.

Clean the glass and dry it completely.

2. Prepare the Application Fluid Add water to the spray bottle and add a few drops of dishwashing detergent.

3. Wet the Glass Spray the mixture abundantly on the glass surface.

4. Separate Protective Paper While removing the carrier paper from the back of the foil, spray water on the adhesive surface.

5.Placethe Foil Place the Foil on the wet glass.

Thanks to the wet surface, you can easily slide and align it.

6. Remove Water and Air Bubbles.

Remove water and air bubbles by pushing them towards the edges from the middle with the Ragle.

7. Excesses Definitely If there are edge overflows, cut with a utility knife with the help of a ruler.

8. Allow to Dry Full adhesion is achieved within 24-48 hours depending on the ambient temperature.

Cautions • Glass and foil must be wet during application.

Do not apply in very hot or very cold weather.

Mild turbidity or traces of water may be seen in the first few days, disappearing as it dries.