this PRODUCT has been SPECIALLY PREPARED FOR the ORDER from the machine ( "

Products specially produced for the order and prepared by making changes or additions to it "

Article) is excluded from the SCOPE OF THE RIGHT OF WITHDRAWAL.

It is not possible to return and exchange.

AREA that can BE dyed (covered): 10 - 13 m² / 2 kg teK floor.

Double Floor makes 5-7 m2 ISONEM liquid glass GLASS, mosaic, tile, porcelain, ceramic, marble, granite, natural stone, wood, concrete, screed, galvanized sheet, aluminum, etc.

it is a double component product used in waterproofing with high chemical and physical resistance as well as excellent water resistance, which can be produced as transparent or transparent color with high resistance to atmospheric conditions, excellent adhesion to surfaces, and also for decorative purposes.

U

It is not affected by V and external weather conditions.

Does not turn yellow, fade or get up over time.

It is easily applied without disturbing and damaging the existing coating, especially in the solution of insulation problems arising on floors such as balconies, terraces, bathrooms, pools.

Solvent-based, two-component Water vapor permeability (m) : 5 ? sD ? 50, CLASS II Mixture Life (hours, 20°C) : 1 (may vary depending on ambient temperature) · Mixture Ratio (by weight) : 7 Parts Liquid Glass A Component / 1 part Liquid Glass B Comp.

Drying Time (hours, 20°C) : 4 ? 8 (may vary depending on the applied surface, application fullness and humidity.

) · Hardening Time (hour, 20°C): 18 - 24 (relative humidity of air should be less than 80%.

) · Full cure reaction time : 7 days USAGE AREAS In glass, glass brick, mosaic, tile mosaic Tiles, ceramic, marble, granite, natural stone, porcelain surfaces In press bricks, · On wooden surfaces Balcony, terrace, bathroom, kitchen, stone coated exteriors In ceramic, glass mosaic coated ornamental pools It helps to prevent dusting on absorbent surfaces Wide usage area APPLICATION METHOD Surface preparation: The relative humidity of the air should be at most 80%, the ambient temperature should be 15 - 35°C and the surface temperature to be applied should be at least 5°C.

It should not be applied outdoors in rainy weather.

Surface cleaning has to be done very well for a good adhesion.

All kinds of oil, dust, dirt, rust and similar substances that may prevent the liquid glass from sticking to the surface between the liquid glass and the floor on the surfaces to be applied have to be completely cleaned.

If the paint is damaged and swollen on old painted surfaces on which liquid glass will be applied, it should be completely scraped.

The sanded surface provides better mechanical properties for liquid glass application and helps the liquid glass to adhere better to the surface.

Application method: Before the application, the two components should be thoroughly mixed in the given proportions and weight.

The two components can only have the desired reaction when they are in a uniform and complete mixture state.

The waiting time between coats should be 24 ? 48 hours/20°C, for the best it should be used as 2 or 3 coats CONSUMPTION and RECOMMENDATION PACKAGING: A Component: 1.5 kg, B Component: 0.5 kg in 2 kg sets