1. The double-sided magnetic property of the Osmo Nano Camera is only compatible with surfaces that are magnetic or can be attracted by magnets.

2. The main camera alone can work for up to 90 minutes. When connected to the Multifunction display, this time can be extended up to 200 minutes. Both battery life and Endurance mode times were measured at room temperature of 25°C, with RockSteady stabilization on, Wi-Fi off, and the screen off.90 minutes of runtime refers to the maximum recording time of the main camera when shooting 1080p/24fps (16:9) video, and 60 minutes of runtime refers to the maximum recording time when shooting 4K/30fps (16:9) video in Endurance mode. Actual operating time may vary depending on device settings, usage, and environmental factors. The data were collected in a controlled environment and should only be taken as reference.

3. Direct connection with the first generation DJI Mic is not supported. DJI microphones are sold separately.

4. Tighten the Glass Lens Cover before use. It is not recommended to use the camera alone for long-term underwater shots or in environments with high water impact pressure. Do not use the camera in hot springs or extreme underwater environments or in contact with corrosive or unknown liquids.

5. IPX4 level splash resistance applies only when the Multifunctional Vision Dock is attached to the camera.

6. Measured in laboratory environment, 4K/30fps resolution, D-Log M color mode and ISO 100 settings. The data is for reference purposes only. Actual results may vary depending on shooting conditions and device settings.

7. Measured in laboratory environment, at 25°C, using a USB-C charger with a maximum PD output power of 30W or more, supporting the standard PD3.0 protocol, with photo and video functions off and the screen off.

8. To achieve a transfer speed of 600MB/s, use the 128GB version of the Osmo Nano with the included USB-C to USB-C PD cable (USB 3.1) and transfer the data from the camera's internal storage. The 64GB version of the Osmo Nano supports transfer speeds of up to 400MB/s. Make sure your computer supports USB 3.1 high-speed transfers

actual transfer rates may vary depending on the computer model.

9. The microSD card needs to be purchased separately and the actual transfer speed depends on the read/write speed of the microSD card.

10. When one or two wireless microphone transmitters are connected to the Osmo Nano, only the operation menu can be used to ensure sound quality

live view is not supported.

11. Horizontal and vertical shots cannot be changed during recording. Please choose the direction you want before you start shooting.

12. Apple Watch data import is only supported on iOS devices.

13. In a noise-free environment, the wireless transfer rate of photos and videos stored in internal storage can reach up to 80 MB/s, while those stored on the microSD card can reach up to 50 MB/s.

14. Live photos are supported on iOS and Android devices that support third-party live photo synthesis. Please check the compatibility according to your device model and system version.

15. It is recommended to use in stationary (fixed) scenarios. The ideal bonding temperature of the base is between -10°C and 40°C. Do not adhere to curved surfaces and ensure that the surface to be adhered is clean. Press for 10 seconds after gluing and wait 30 minutes before using.

16. SuperNight mode supports only 8-bit color depth and frame rate up to 30fps. It also does not support a 4:3 aspect ratio.