Digital Voltmeter Digital Ammeter DC 100V 10a 0

100V Voltmeter 0

It is a module with 10a ammeter feature

3 digits and the voltmeter indicator in red is at the top

3 Digits and current indicator in blue is at the bottom

Voltmeter measuring capacity is 2-stage depending on the supply of the device

Figure 5 shows the schematic for connection

Measuring voltage range 0 if the instrument supply and measuring leads are the same

30V

Cable with 3 fine wires and sockets for voltage measurement comes with the product

Black cable is used as the earth end

It is the + cable for the red colored device supply

The yellow cable is the measuring tip

If the red and yellow tips are used together, the measuring range is 0 as mentioned above

30V

If used in combination, the product will deteriorate if you apply a voltage higher than 30V

If the voltmeter is

if it is possible to feed from a power source, separately with the yellow tip 0

You can operate in the wide voltage measuring range between 100V

For current measurement, 2 thick cables and 2 sockets cables are also included with the product

With this cable, the current is connected in series to the part to be measured

Performs current measurement with the shunt resistance available on the device

There are 2 pots on the back of the device to calibrate errors in current and voltage measurements

If you have another measuring instrument whose measuring accuracy you trust, you can calibrate the ammeter and voltmeter by means of pots according to this device.

Features: Voltmeter operating voltage : DC 4.5

30V (If you apply more than 30V voltage, the product will break down

) Voltmeter measurement range : DC 0

30V DC

100V Current measuring range : DC 0

10a Voltage sensitivity : 0.1V Current sensitivity : 0.01 A Display sensitivity : 1% ( ± 1 digit) 2 pcs 3 digits 0.28?7 segment display Refresh Rate : 300ms Dimensions : 48mm x 29mm x 26mm