General Information: It is a single-component polyurethane adhesive foam with high adhesive properties used to provide interior and exterior insulation of heat and sound insulation boards such as EPS and XPS.

It provides foam outlet like foam application with fine pipette gun.

Application Areas: Its boards ensure that the structures adhere very well to many construction materials such as concrete, plaster, brick, wood, cement, PVC, bituminous membrane, rigid polyurethane foam.

Usage: The box should be shaken vigorously before use.

After the foam is placed in the Somafix Foam Gun by turning it, the foam should be used by pressing the trigger of the gun after the rear spray adjustment is made.

Tighten the adhesive 2 cm from the corners of the panel to a width of 3 cm and in the form of a strip, and also apply it parallel to the long edge of the panel with a single line from the middle of the short edge.

Adhere the panel by adjusting the corners and pressing it to the wall.

Foam freezes 2 hours after application.

Do not remove unused foam from the gun and tighten the rear limit thoroughly.

When installing new Foam Somafix P.

Ü

Use the Foam Cleaner.