• ECA Built-In Bath Mixer Nozzle Beak   Product Code: 102159209-K Warranty Period: 20 Years Warranty. Authorized Service No: 444 0 322     Technical Specifications There are 3 Types of Badge Alternatives, Circular and Elliptical. Installation Connection is G 1/2. Nozzle Length is 116 mm.   Plated   Chrome     Before Installation Before   installing your fixture, refer to the manual. Keep your manual for the warranty period of your armature. Keep your fixture in its original packaging until it is installed. If the mains pressure is above 5 bar, working at this pressure for a long time will shorten the life of your fixture. Therefore, use E.C.A pressure reduction regulator at the installation inlet. Install an E.C.A. filter at the entrance of the installation where you will connect your armature. Before connecting your fixture to the installation, clean the inside of the pipes by draining some water. Use an E.C.A filtered angle tap to connect the sink and sink faucets to the installation. Do not use chrome-plated aramatures in places such as hot springs. Do not leave your luminaire attached for a long time in buildings under construction. Materials such as construction mortar, lime, etc. can be poured on the luminaire. In addition, chemicals in the air may combine with the humidity of the air and cause deterioration on the luminaire surface. If such materials are placed on the armature during construction