Renewal Kit Membrane Sleeve + Waste Reducer + Shut Off Valve Ready Set Shut Off Valve 4-way Shut Off Valve prevents wastewater disposal by turning off the water of the system when the tank is full.

In water purifiers 3.

located at the filter outlet.

is the valve that stops the treatment process and closes the wastewater when the system fills the tank.

While inlet water passes through one side, clean water passes through the other.

whichever side has high pressure, that side is open, the lower side is always closed.

It is one of the most important parts of the reverse osmosis system.

As the name suggests, it is a shut-off valve.

In other words, while the water purifier is producing, it sends the wastewater out.

When the tank is full and the pressure in the system reaches 40 PSİ, if there is no water use, the shut-off valve closes itself thanks to the pressure trapped in the lines and does not allow the inlet water to pass.

Thus, there is no production and wastewater.

When the use of water from the tap starts, the shut-off valve opens itself.

This process continues.

What is a membrane? In short, the membrane filter serves to obtain clean water by filtering all harmful substances in the water.

It filters water at the molecular level and purifies microbes, bacteria, heavy metals, water-hardening minerals and all harmful substances in the water.

What is a Membrane Sheath Membrane sheaths are high pressure resistant slots where RO membranes are placed in reverse osmosis systems.

Membrane sleeves are manufactured to withstand 300 psi, 450 psi, 600 psi, 1000 psi.

What is Flow? In this article, we will examine flow in water treatment devices, which is used in the outlet of wastewater in the membrane filter, also known as flow restrictor.

It is a liquid restrictor used to increase the water pressure in the membrane filter in flow treatment devices and usually has numbers on Flow 200 - 300 - 350 - 450 - 550 - 1200 - 1500.

As the number increases, the amount of wastewater increases and the membrane pressure decreases as it increases to the number.

What is a Check Valve? Check Valve Part Membrane housing is located in the clean water outlet.

Its biggest task is to prevent water from going backwards.

A check valve , check valve, or one-way valve is a mechanical control valve that normally allows one-way passage of water.

Depends on membrane houzing.

Water Treatment Hose ? The Water Treatment Hose is made of 1/4 inch 1 Meter BPA free, FDA approved and NSF Standard 58 certified LLDPE-Linear Low Density Polyethylene material.

Resistant to pressure, temperature cracking and environmental influences.