Wash And Cure 3.0 Washing and Curing Machine Larger Size for Increased Capacity Compared to Anycubic Wash & Cure 2.0, the cleaning basket capacity of Anycubic Wash & Cure 3 has now reached 3 liters with an impressive 100% increase. The total volume of the cleaning bucket was increased to 4 liters. This makes it perfectly adapted for LCD (light curing) 3D printers of 7.3 inches or smaller in size. The curing size was increased by 15% to 160*180 millimeters to accommodate larger and more models for a single post-treatment session. Localized Reinforcement, Uniform Curing "Innovative Flexicure Gooseneck Light Design" significantly strengthens the curing effect in thin areas such as the top of the models and the skirts of the garments by increasing the energy value in the 1-3 cm irradiation range 30.000uW/cm ². The curing integrity of Anycubic Wash & Cure 3, which adopts a brand new light beads and lens light source arrangement, has been increased by 20% compared to the previous 2.0. This results in a more thorough and comprehensive refinement of the entire model. Double Layer Design, IPA Saving The double layer PP material cleaning basket is designed to support simultaneous cleaning with the platform. It has two adjustable heights at 100 mm and 165 mm and adapts to printing platforms ranging from 5.9 inches to 7.3 inches

Enhanced Gooseneck light curing mode can be easily turned on and off with one click. Endless rotary knob control, adjustable from 1 to 30 minutes on request. Thanks to a more insulated structural design and software optimization, noise interference generated during cleaning and curing is reduced, creating a quieter and more comfortable working environment.