It is a new generation paint that has excellent adhesion to all surfaces, is water-based, pure acrylic-based, and gives the appearance of wood.

The surfaces to be applied can be applied on surfaces such as Bianca stella, all kinds of wood, furniture, parquet, laminate, ceramic, tile, marble, glass, plastic, metal, aluminum, galvanized, zinc, porcelain, fabric, wall, stone, paper, cardboard.

Properties The concealment is very high.

It has excellent water resistance.

Since its water resistance is very good, it also provides waterproofing on the surface where it is applied.

It has high chemical resistance (soap, dishwashing detergent, shampoo, etc.).

Since it is very good to spread, it does not leave any brush and roller marks, and gives the user the desired time for the necessary corrections.

It does not require any additional varnish application thanks to the glossy appearance it leaves after application.

It has high adhesive strength, it does not require any primer.

Dirt and stain resistant, it is cleaned very easily with a wet and soapy cloth.

Perfumed, no unpleasant odour.

Since it is resistant to water and chemicals, it does not require the application of protective varnish.

Suitable for use in all indoor and outdoor spaces.

It has unlimited color options with the Colorate coloring system.

Application The application surface must be clean.

The surface has to be free from all factors that will reduce the adhesion of the paint to the surface such as all dust, dirt, oil, and sanding has to be done when necessary.

It does not require the use of any primer before application.

If application is to be made on metal surfaces, it is recommended to prime the surface with bianca antirust to prevent corrosion formation.

After opening the Bianca stella package, it is mixed until a homogeneous consistency is obtained.

It is applied to the required pre-prepared surface in 2 layers without thinning the product, by silk brush, silk roller, moher roller, or spraying.

Min. between floors.

It should be waited for 2 hours.

During the application, care has to be taken to ensure that the applied surface and ambient temperature is between +5ºc and +30ºc.