SENTA Parquet Varnish is scratch resistant

forms a film resistant to water, detergent and chemical agents. It is used to protect parquet and all kinds of wooden surfaces from chemical and physical factors. Application Description The surface must be free of dust, dry and clean. Before applying to old varnished surfaces, syrup must be made until it reaches the raw wood. After purging, the sanding powders can be wiped thoroughly and applied. SENTA Cellulosic Parquet Filler Varnish should be applied to dry and clean new parquet surfaces in 2 coats at 1-2 hour intervals and light sanding should be done after sufficient drying. Ready to use. Apply 2 coats with brush or roller or 3 coats depending on the absorbency of the surface. Depending on the applied surface and application tool, it can be thinned with 10-15% SENTA Synthetic Thinner when necessary. It is recommended to wait for 24 hours between coats and to sand rough. It gains its physical and chemical durability within 3-4 days. Cleaning of brushes and tools after application can be done with SENTA Synthetic Thinner. How Much Space Does It Paint? 10-15 m2 area can be covered with 1 L on a single floor.