Package 1 Size :14 cm Resin epoxy silicone injection molds are heat-resistant and easily separable, that is, they are a resin epoxy mold that can be removed after the product has dried, which allows it to dry quickly in resin epoxy castings, which can protect it in a hot environment between 200 and 300 degrees on average, and our silicone molds are non-reusable resin molds that can be used many times.

Resin epoxy molds, which can be used in many areas, can create differences in many sectors depending on your imagination.

Usage : It is poured into 2 cups of resin into 1 cup and mixed slowly so that there are no air bubbles.

Mix thoroughly for 2-3 minutes, right to left , left to right, and bottom to top.

During mixing, a homogeneous mixture should be provided to touch the bottom and edges of the mixing rod container.

Then, the mixture is rested for 5 minutes and poured into the mold and allowed to dry.

After about 6 hours, it can be touched by hand.

Fully hardens within 12 hours.

48 hours It becomes an anti-scratch glass