The package includes 1 piece of 0.5 lt bianca stella pure acrylic conversion paint, 1 piece of 0.5 lt maximo solvent based liquid glass, 1 piece of marble effect, paint pan, roll set and roll spare.

Roller spare is for liquid glass application.

With this material, you can easily paint your countertops between 8-10 m2 and give them a glossy marble appearance.

Detailed description of the use of the products is given below.

The application sequence is in the form of bianca stella paint, marble effect, maximo liquid glass.

Black marble effect is sent for light colors and white marble effect is sent for dark colors.

Since the colors are specially prepared, they are not accepted except for damage in cargo.

Stella – water-based pure acrylic new generation conversion paint It is a water-based, pure acrylic-based new generation paint with excellent adhesion to all surfaces.

The surfaces to be applied can be applied on surfaces such as Bianca stella, all kinds of wood, furniture, parquet, laminate, ceramic, tile, marble, glass, plastic, metal, aluminum, galvanized, zinc, porcelain, fabric, wall, stone, paper, cardboard.

Application The application surface must be clean.

The surface has to be free from all factors that will reduce the adhesion of the paint to the surface such as all dust, dirt, oil, and sanding has to be done when necessary.

It does not require the use of any primer before application.

If application is to be made on metal surfaces, it is recommended to prime the surface with bianca antirust to prevent corrosion formation.

After opening the Bianca stella package, it is mixed until a homogeneous consistency is obtained.

It is applied to the required pre-prepared surface in 2 layers without thinning the product, with a silk brush, silk roller, moher roller or spraying.

Min. between floors.

It should be waited for 2 hours.

During the application, care should be taken to ensure that the applied surface and ambient temperature is between +5°c and +30°c.

Thinning Ready to use.

Mix before application.

Drying time (20°c) Touch drying: 1 – 2 hours.

Last drying: 24 hours.

Start-up time: 3 days contact of the surfaces with the liquid has to be prevented and used carefully.

Chemical cleaning materials can be used after 7 days.

Depending on the application method and the floor, 10 – 12 m² area can be painted on double floors with 1 liter of paintable area.