TECHNICAL SPECIFICATIONS

THERMAL PAINT

Consumption : On exterior facades

1 L /m² (min.

1 mm thickness)

In interior applications

max. 300 mL/m2

Certification : TSE K 127 THERMAL PAINTS

Grade : COLD CLIMATE PAINT

Brightness : N/A (value not sought)

Wet scrubbing resistance (m) : CLASS II

Covering strength (m²/L) : CLASS I

Dry film thickness: CLASS E5

Grain size : CLASS S2

Water vapor permeability (m) : CLASS II

Water transfer rate (kg/m².

h0 '5) : CLASS W3

Crack covering feature (?m) : no value sought, CLASS A0

Carbon dioxide permeability (g/m².

d) : value not sought, CLASS C0

Surface heat transfer value ( ) : min.

0 - 80

Sunlight absorbency value (?) : 0.820, min.

0 - 80

Thermal paint surface resistance (RS) : 0.0495 ± 1.5%

Thermal conductivity coefficient (W/mK) : 0.023,? <

.060

Resistance to impact: No cracking, rupture

Density (25°C, g/mL) : 0.85 ± 0.10

pH (25°C) : 7.0 – 9.0

Viscosity (25°C, mPa.

s) : 12500 – 13500

AREAS OF USE

SURFACE PREPARATION : The surfaces to be painted must be free from dirt, oil, rust, grease, loose parts and other foreign materials.

The selection of primer suitable for the surface is made according to the following table *.

Isonem universal PRIMER (diluted with water in a ratio of 1:7 - 1 Part Primer, 7 Part Water) insulation and paint primer should be applied in a single layer with a consumption of 100 – 200 g/m².

Then the primer is left to dry for 4 hours.

METHOD OF ADMINISTRATION: Isonem THERMAL paint should be thoroughly mixed before use.

In exterior applications, 2-3 coats can be applied preferably with a roller or brush without thinning the product.

It has to be applied in 1 or 2 layers according to color and coverage in interior wall applications.

It is recommended to apply 2-3 coats in roof applications.

It is recommended that each coat be painted perpendicular to the previous coat.

Application can be made by considering the drying processes.

After the first coat has dried, the second and third coats have to be applied.

Wait 4 hours between two coats of application.