6S 15a 24V Li-Ion 18650 Battery Battery Charging-Protection Circuit - BMS Module Lithium battery and material

need this type of BMS cards for protection in case of overcharging, over-discharge, over-current, short circuit, ultra-high temperature, etc. In an extreme case, the circuit protects itself. 6 in 6S indicates that a maximum of 6 batteries can be connected. FEATURES Protection circuit with high current protection plate, continuous 15a current Overcharge protection, over discharge protection, over current protection, short circuit protection P + P- : is the abbreviation of PACK PACKAGE That is, the output of the positive and negative poles B + B- : is the abbreviation of the battery, which is the positive and negative pole of the battery. PCB board size: (approx.) 50 * 30*2 mm DETAILS Lampshift maximum discharge current: 15a Instantaneous discharge current: 25a Charge voltage: 25.5V Charge current: 15a (MAX) Overcharge sensing voltage: 4.28 ± 0.05V Overcharge protection delay: 0.1S Overcharge output voltage: 4.08 ± 0.05V Overcharge sensing voltage: 2.55 ± 0.08V Overdischarge sensing delay: 0.1S Overdischarge release voltage: 2.9 ± 0.1V Overcurrent sensing voltage: 150mV Overcurrent sensing delay: 9MS Overcurrent protection current: 30 ± 3A Overcurrent protection release state: disconnect load Short circuit sensing delay: 250uS Short circuit protection release state: negative open cut Main circuit transmission resistance: 20m? Operating current: ? 30uA Sleep current (battery over discharge) ? 10uA Temperature range: -30 / + 80 ?