Produced in GENERAL ISO 9001:2015 quality management system standards, TSE certified.

Camellia Daybed is produced from 1 mm thick metal profiles in CR-ST 12 quality.

The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion, fading or rusting.

The product is completely demounted.

With the special allen screw threading system, it can be easily installed without using any additional tools or connection systems.

Bed frame durability increases with Allen screw system

negativities such as shaking, sound, squeaking are not experienced.

The product has a 2-year warranty.

In case of loss, deformation or user-induced error of the product part, Argimo provides equipment support for 10 years and parts can be supplied for a fee.

TECHNICAL DETAIL There are 10 iron profile laths as bedstead underbed platform.

Slot depth is 6 cm.

The bedstead is 28 cm high from the ground.

The appropriate bed size for the cot is the size of the cot.

Bed is not included in the product.

The bed size to be taken for the 90x190 cm product should be 90x190 cm, and the bed size to be taken for the bottom cot should be 90x180 cm.

The bed size to be taken for the 90x200 cm product should be 90x200 cm, and the bed size to be taken for the bottom cot should be 90x190 cm.

The outer size of the bedstead is 10 cm more than the size you have taken.

(Example: The outer size of the product taken as 90x190 cm is 100x200 cm.

Carrying Capacity

250 kg.

Size: 90x190 cm / 90x200 cm

ADVANTAGE It can be used as an under-bed stacking area and is easy to clean.

With its high carrying capacity, it can be used by children, young people and adults of all ages.

Provides practical solutions for spaces with limited living spaces (small rooms, dormitory, hostel).

It can be used as a single bedstead or cedar.

It can be easily installed.

PACKAGING – TRANSPORTATION The product is delivered in a single box.

BC wave dopel cardboard box and its inside is supported by styrofoam and bubble wrap nylon.

The outside of the box is packed with shrink nylon.

(Packaging boxes are barcoded.

Our products are delivered disassembled with free shipping.

After receiving the product, cargo, etc.

If there are damaged/missing parts due to welding, when the parts are determined from the installation diagram and forwarded to our customer representative, the damaged/missing part is sent to you free of charge.

INSTALLATION CAUTION: All screws must be fastened by hand before product installation, all screws must be tightened with wrench after product installation is completed.

Installation manual is included in the package.

Equipment and bunk apparatus required for installation are included in the box.

Installation belongs to the customer.

You can ask our technical team for support for the installation.